[Lifetime Warranty] DC32-00007A Dryer Thermistor DIRECT - Compatible with Samsung & Kenmore Dryers - Replaces PS4204984 AP4201716 N3S1-K41 2068429 PS2461163 EAP2461163 - Pack of 3
DC32-00007A Dryer Thermistor - Pack of 3
Key Features
- Package contains three (3) DC32-00007A thermistors.
- Monitors and regulates the temperature inside the dryer drum.
- Located on the blower housing to sense air temperature.
- Corrects heating and cycle timing issues caused by a faulty sensor.
Replaces / Cross-Reference Part Numbers
- DC32-00007A
- AP4201716
- PS4204984
- 2068429
- PS2461163
- EAP2461163
- N3SI-K41
- N3S1-K41
- WP35001191
Compatibility & Fitment
- Designed for a direct fit on many Samsung and Kenmore clothes dryers.
- Compatible with models such as Samsung DV50K7500EW/A3-00.
- Verify compatibility by checking your dryer's original part number.
When to Replace
- Dryer overheats or does not heat at all.
- Drying cycles are too long or end prematurely.
- Dryer will not start.
- Specific error codes appear on the display panel.
Installation Tips
- Disconnect the dryer from its power source before beginning repair.
- The thermistor is typically mounted on the blower wheel housing.
- Clean any lint or debris from the blower housing and vent during replacement.
- A multimeter can be used to test the resistance of the existing thermistor to confirm failure.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
[Lifetime Warranty] DC32-00007A Dryer Thermistor DIRECT - Compatible with Samsung & Kenmore Dryers - Replaces PS4204984 AP4201716 N3S1-K41 2068429 PS2461163 EAP2461163 - Pack of 3
[Lifetime Warranty] DC32-00007A Dryer Thermistor DIRECT - Compatible with Samsung & Kenmore Dryers - Replaces PS4204984 AP4201716 N3S1-K41 2068429 PS2461163 EAP2461163 - Pack of 3
DC32-00007A Dryer Thermistor - Pack of 3
Key Features
- Package contains three (3) DC32-00007A thermistors.
- Monitors and regulates the temperature inside the dryer drum.
- Located on the blower housing to sense air temperature.
- Corrects heating and cycle timing issues caused by a faulty sensor.
Replaces / Cross-Reference Part Numbers
- DC32-00007A
- AP4201716
- PS4204984
- 2068429
- PS2461163
- EAP2461163
- N3SI-K41
- N3S1-K41
- WP35001191
Compatibility & Fitment
- Designed for a direct fit on many Samsung and Kenmore clothes dryers.
- Compatible with models such as Samsung DV50K7500EW/A3-00.
- Verify compatibility by checking your dryer's original part number.
When to Replace
- Dryer overheats or does not heat at all.
- Drying cycles are too long or end prematurely.
- Dryer will not start.
- Specific error codes appear on the display panel.
Installation Tips
- Disconnect the dryer from its power source before beginning repair.
- The thermistor is typically mounted on the blower wheel housing.
- Clean any lint or debris from the blower housing and vent during replacement.
- A multimeter can be used to test the resistance of the existing thermistor to confirm failure.
$17.32
[Lifetime Warranty] DC32-00007A Dryer Thermistor DIRECT - Compatible with Samsung & Kenmore Dryers - Replaces PS4204984 AP4201716 N3S1-K41 2068429 PS2461163 EAP2461163 - Pack of 3—
$17.32
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DC32-00007A Dryer Thermistor - Pack of 3
Key Features
- Package contains three (3) DC32-00007A thermistors.
- Monitors and regulates the temperature inside the dryer drum.
- Located on the blower housing to sense air temperature.
- Corrects heating and cycle timing issues caused by a faulty sensor.
Replaces / Cross-Reference Part Numbers
- DC32-00007A
- AP4201716
- PS4204984
- 2068429
- PS2461163
- EAP2461163
- N3SI-K41
- N3S1-K41
- WP35001191
Compatibility & Fitment
- Designed for a direct fit on many Samsung and Kenmore clothes dryers.
- Compatible with models such as Samsung DV50K7500EW/A3-00.
- Verify compatibility by checking your dryer's original part number.
When to Replace
- Dryer overheats or does not heat at all.
- Drying cycles are too long or end prematurely.
- Dryer will not start.
- Specific error codes appear on the display panel.
Installation Tips
- Disconnect the dryer from its power source before beginning repair.
- The thermistor is typically mounted on the blower wheel housing.
- Clean any lint or debris from the blower housing and vent during replacement.
- A multimeter can be used to test the resistance of the existing thermistor to confirm failure.
