W10195840 WPW10195840 Upper Rack Adjuster Positioner - Pack of 2

Key Features

• High-Temperature Structural Polymer: Manufactured from a specialized, reinforced plastic designed to endure the intense thermal stress of "Sani-Rinse" and "Heated Dry" cycles without warping or becoming brittle over time.
• Precision Gear-Track Design: Features an optimized internal track system that allows the upper rack to slide smoothly between high and low positions, accommodating tall wine glasses or large stock pots in the lower rack.
• Enhanced Load Bearing: Specifically engineered to support the weight of a fully loaded upper rack, preventing "sagging" or accidental dropping that can lead to broken glassware.
• Detergent-Resistant Construction: 100% rust-proof and resistant to the caustic enzymes, surfactants, and high-pH chemicals found in modern dishwasher detergent pods and rinse aids.
• Complete 2-Piece Maintenance Set: This value pack allows for the simultaneous replacement of both the left and right side positioner housings, restoring the level balance and structural integrity of your upper dish rack.

Replaces / Cross-Reference Part Numbers

• Primary Parts: W10195840, WPW10195840, WPW10195840VP.
• Industry Standards: PS11750093.

Compatibility & Fitment

This adjuster positioner is the standard housing for the upper rack height mechanism on modern Whirlpool-manufactured dishwashers. Key compatible brands include:

• Whirlpool & Maytag: Fits many WDT, WDF, and MDB series models (e.g., WDT720PADM, MDB4949SHZ, WDF520PADM).
• KitchenAid & Jenn-Air: Compatible with various KDTM, KDTE, and JDT series high-end units (e.g., KDTE104ESS, KUDC10FXSS).
• Kenmore (665 Series): Fits hundreds of 665-prefix "Elite" and standard dishwashers produced for Sears (e.g., 665.13263K311, 665.13282K113).
• Amana & Estate: Direct fit for dozens of ADB and DU series models utilizing the W10195840 style.
• Note: This is the Adjuster Housing (Positioner). It is designed to work with the W10195839 adjuster and W10250160 clip-locks.

When to Replace

• Upper Rack Dropping: One side of the upper rack suddenly falls or "slumps" because the plastic gear-track inside the housing has stripped or snapped.
• Rack Won't Adjust: The height adjustment mechanism feels jammed or wobbly, making it impossible to raise or lower the rack securely.
• Unbalanced Loading: The upper rack sits at an angle, making it difficult to load tall items or causing the middle spray arm to hit the dishes below.
• Visible Heat Damage: The grey plastic looks "whitened" or has visible stress fractures from long-term exposure to the dishwasher's heating element.
• Broken Mounting Tabs: The tabs that hold the adjuster to the rack wire have snapped off, causing the whole assembly to hang loosely.

Installation Tips

• No Specialized Tools Required: This is a "snap-fit" repair. Pull the upper dish rack out completely or remove it from the tracks for the best visibility and access to the side rails.
• Removing the Old Housing: You will first need to remove the W10250160 Clip-locks. Use a small flat-head screwdriver to gently pry the clips away from the W10195840 housing.
• Clean the Rack Wires: Before snapping on the new positioner, wipe away any old food particles or mineral scale from the rack's side wires to ensure a secure, permanent lock.
• Alignment: Ensure the positioner is oriented correctly with the gear-track facing inward. Align it with the height adjuster arm before snapping the locking clips back into place.
• The "Click" Test: Press all components firmly until you hear a distinct "click." Test the height adjustment several times to ensure the rack moves smoothly and locks securely into both the upper and lower positions.