HEPA Filter with Mesh Guard for INSE and TMA Cordless Vacuums - Pack of 4 + Brush

Key Features

• Dual-layer filtration system featuring a high-efficiency particulate air (HEPA) core and a white mesh pre-filter.
• Mesh guard prevents large debris from embedding in the HEPA pleats, extending the operational life of the filter.
• Engineered to capture 99.97% of fine dust, pet dander, and microscopic allergens down to 0.3 microns.
• Washable and reusable construction designed to maintain suction performance over multiple cleaning cycles.
• Includes 4 replacement filters and 1 specialized cleaning brush for routine maintenance.

Replaces / Cross-Reference Part Numbers

• N5S-F04
• S6-FL-KIT
• TMA-T120-F
• INSE-S6P-FILTER

Compatibility & Fitment

• INSE Cordless Models: N5S, N5T, S6T, S6P, S6P Pro, S610
• TMA Cordless Models: T120, T121, T150, T151, T180, T181, T210, T220

When to Replace

• Suction power is noticeably diminished even when the dust cup is empty.
• Visible dust or debris bypasses the filter and enters the motor housing.
• The filter remains discolored or emits an odor after a thorough cleaning and drying cycle.
• Physical damage, such as tears in the HEPA media or a cracked plastic frame, is present.
• Standard replacement interval: Every 3 to 4 months depending on usage frequency and household environment.

Installation Tips

• Ensure the vacuum is powered off and the battery is removed before servicing.
• Press the dust cup release button to access the internal filter assembly.
• Remove the old filter and use the included cleaning brush to clear any fine dust from the cyclonic separator.
• Press the new filter firmly into the housing to ensure the gasket creates a vacuum-tight seal.
• If washing the filter, rinse with cold water only; do not use detergents. The filter must be completely air-dried for at least 24 hours before reinstallation to prevent motor moisture damage.