GW9508 / 360151 Pool Cleaner Vacuum Skirt Replacement - Pack of 2

Key Features

• High-Flex Suction Seal: Engineered from a specialized, pliable polymer that conforms to the unique contours of your pool floor, creating a tight vacuum seal to lift stubborn sand, dirt, and small debris.
• Pleated "Glider" Design: The accordion-style pleats allow the cleaner to transition smoothly over uneven surfaces, main drains, and light fixtures without getting stuck or losing suction.
• UV & Chemical Resistant: Manufactured to withstand prolonged exposure to harsh pool chemicals and intense sunlight, preventing the skirt from becoming brittle, chalky, or misshapen over time.
• Debris-Trapping Edge: Features a reinforced outer rim designed to funnel leaves and larger particles toward the center suction port, ensuring a more efficient cleaning pass.

Replaces / Cross-Reference Part Numbers

• Primary Part Number: GW9508.
• Verified Cross-References: 360151, GW9500-SKIRT.
• Manufacturer Equivalents: Pentair / Sta-Rite GW9508, Dorado 360151.

Compatibility & Fitment

This vacuum skirt is a direct replacement for Pentair and Sta-Rite suction-side cleaners. Key compatible models include:

• Pentair Kreepy Krauly Great White: Fits the standard GW9500 model.
• Pentair Dorado: Compatible with the 360151 automatic pool and spa cleaner.
• Sta-Rite Great White: Direct fit for legacy Sta-Rite branded units using the GW9508 part number.
• Note: This skirt is the "bristle-style" or "pleated" seal that sits at the very bottom of the unit. Ensure the mounting ring on your cleaner is free of old rubber fragments before snapping the new skirt into place.

When to Replace

• Cleaner Stalling on Drains: If the cleaner frequently gets hung up on main drains or floor returns, the skirt has likely lost its flexibility or "lift."
• Visible Tears or Holes: Any physical breach in the skirt allows suction to escape, significantly reducing the cleaner's ability to pick up debris.
• Curled or Warped Edges: If the skirt is "memory-set" in a curled position, it will no longer sit flush against the pool floor, leaving streaks of dirt behind.
• Reduced Climbing Ability: A worn skirt affects the overall hydrodynamics of the unit, often preventing it from climbing walls or navigating deep-end transitions.

Installation Tips

• The "Warm Water" Trick: PRO TIP: Before installation, soak the new GW9508 skirt in a bucket of warm (not boiling) water for 5 minutes. This makes the material extra pliable and much easier to stretch over the mounting ring of the cleaner.
• Check the Bristles: While replacing the skirt, inspect the internal brushes/bristles. If they are worn down to the nub, the skirt won't be able to provide the correct "hover" height for optimal suction.
• Clean the Groove: Use a small brush to clear any sand or calcium buildup from the mounting groove on the cleaner body. Debris in this track can cause the skirt to pop off during operation.
• Even Seating: Ensure the skirt is snapped in evenly all the way around. If one side is higher than the other, the cleaner will pull to one side or spin in circles.